The First 3 wall panels installed February 16, 2018
As we all know, this winter has been challenging to say the least. Four 50+ degree swings so far this year. Despite that we’ve muddled along and made some progress at the Sand Hill Farm site. Most of the work has been underground, but as of last Friday, wall panels have begun to stand up on the building pad. We;re now in 3D! The erection crew worked over the weekend and about half the first floor is framed. At this rate they will make quick work of things and we’ll be weathered in before we know it.
In the picture you can see that the first three panels at the Southwest corner are in place. The panels are 2×6 framing with OSB exterior sheathing. The 2×6 framing allows for additional insulation. The 2×6 studs are on 24″ centers to reduce the areas of heat transfer for energy efficiency. California Corners (Green That Saves Green 101) were used to increase insulation as well. The window and door openings are pre-framed, so once the panels are up and the house wrap is installed, the fenestrations (our big word of the day) will be filled quickly too.
Fire Hydrant at the Southwest corner of the Building
Note the fire hydrant in the lower right of the picture. The main water lines are in place as well. We have a fire hydrant waiting on the Town to bring water to it. My understanding is that the street and utilities project should go out for bid within 2 weeks with bids due in around 6 weeks. We’ll be needing that soon! They’ve promised installation by the 1st of June.
The building will be sprinkled, so we already have the riser in place in the maintenance room for fire protection. Rough-in for that will begin once framing is complete so we can get things placed prior to drywall installation.
It’s great to see things coming together after some of the earlier struggles.
I ran across an ad for Murphy Doors that I thought was interesting. I liked some of the pictures of doors to secret rooms hidden behind bookcases a la Batman… and Richard Ford. (Richard had a hidden bookcase door that took him from the the kitchen to the bar in his lake cottage.) And anyway, I’m always intrigued by anything with the Murphy name on it as always reminds me of my grandfather.
The first thought that came to mind was that it seems like a natural fit for a “Tiny Home” solution too. (Yes, despite generally dispising most of the home improvement shows, I do watch that one occasionally.) Few of them seem to use the Murphy Bed solution opting for low-headroom lofts, but any double purpose installation seems to be fair game.
I was particularly intrigued by the idea of using these as a pantry solution. We have pantry cabinets in our home, but without exterior shelves. The idea of a combination of interior and exterior shelves would make that installation more aesthetically pleasing while increasing the functionality.
I was concerned about the hardware strength, but it looks like what they provide is substantial and should do the job. I’m not sure how comfortable I would be installing one in a retrofit situation where I didn’t know how the door framing was completed, but it should be perfectly fine in new construction or in major remodels were the framing could be beefed up or at least verified.
I think the Murphy Door can be a cool solution for the right application and actually become a conversation piece in some locations. Great idea!
Our friends at SRKM Architecture shared a picture with us from the past. We think the project was Robin Hood Leisure Living at Grace Village in Winona Lake. That’s our best guess anyway (per John Singleton). Pictured are Larry Berger and P.T. McKinnis. (Check out that mullet!)
Robin Hood Homes are one and two bedroom duplexes in a condominium setting. They are part of the Grace Village Retirement Community. It is a staged community with several retirement living options.
This was the first project where we put radiant heating into the floor. It was a learning experience… particularly working with the residents to teach them the lag involved with this type of heat. Residents that were used to the instant gratification of forced air heat were often over-adjusting the thermostats. Until they got the hang of it, they struggled with temperature swings due to readjusting the thermostat before it had reached temperature and vice versa when they turned it down.
Image from Habitat for Humanity of Marshall County website
I have always had a plan to include a Habitat for Humanity site at Sand Hill Farm. I recently met with representatives of Habitat for Humanity of Marshall County and the Town of Culver to discuss this. They were excited about the opportunity and were happy to provide additional information.
If you’re interested in possibly participating in a Habitat Home at Sand Hill Farm, I encourage you to look at the information on their site and fill out an application. Copies of the application can be found on their website here and can be picked up at the Town Hall in Culver. The plan would be to offer a home in late 2018 or sometime in 2019. Once accepted, an applicant must put in 100 hours of service before the build starts, so the sooner you start the process, the better.
Habitat for Humanity is always looking for volunteers, so if you would like to volunteer you can check out those opportunities on their website here. If you would like to contribute, they accept donations directly at: 116 South Walnut Street, Plymouth, IN and for convenience, you can also contribute to them through Marshall County Community Foundation where they have an established fund. The Community Foundation site accepts credit card donations.
From Left to Right, Bob Porter – Culver Utilities Superintendent, Jack Jordan – State Representative, Dale Cramer – Lake City Bank, Joel Samuelson – Culver Town Council, Kevin Berger – Easterday Construction Co., Inc., Tammy Shaffer – Culver Town Council, Ginny Munroe – Culver Town Council President.
I was pretty impressed with the turn out for the Sand Hill Farm Ground Breaking Ceremony last Tuesday, November 5th. There were around 35 people there including representatives from the Town, County and State. Town Council President – Ginny Munroe, County Commissioner – Kevin Overmyer and Lake City Bank Representative – Dale Cramer all spoke in support of the project. I truly appreciated the kudos. We broke out the gold shovels and made a showing of it for the Press.
Speaking about Workforce Housing at the Stellarbration on November 5th. From Left to Right, Kevin Berger – Easterday Construction Co., Inc., Brian Meek – Elkay Wood Products, Karen Shuman – Culver Community School Corp., Don Fox – Culver Academies
The theme from everyone was how this was a first step towards addressing Culver and Marshall County’s workforce housing needs. Currently, Marshall County has an unemployment rate of less than 3%. The general “rule” is that once it gets below 4%, everyone that wants to work is working. Since there are still jobs going unfilled, the next step would be to recruit labor from outside the County. That’s difficult when there isn’t housing available for those new workers. Sand Hill Farm hopes to be a first step towards addressing this. This is Easterday Construction being a community partner/leader.
Along with the several of our area newspapers, we received coverage from the three major networks, ABC 57, WNDU 16 and WSBT 22. See WSBT links for video clips of the Stellerbration event and ABC 57 and WNDU 16 for a little more about the Sand Hill Farm ground breaking. They were all kind with their video editing and made us look good!
Housing was the signature piece of Culver’s Stellar Communities application and I truly think we wouldn’t have scored as highly without the Phase I portion of this project underway. It showed that even without winning Stellar designation last year, Culver moved forward, addressing the needs identified in our Strategic Investment Plan. Having Regional Cities also put money towards this project was positive too. It showed a regional commitment that the State values. At several of the presentations, I was pleased to stand with Culver’s three largest employers, Elkay Wood Products, Culver Community School Corporation and Culver Academies, as their representatives spoke about the needs this project was addressing and how this needs to be just the start.
Excavation underway at Sand Hill Farm. Some of the hill is going into the building pad.
Tuesday was a true ground breaking as we made our presentations with an excavator working in the background. Currently the building pad is nearly complete and the excavator should be cutting in footings in the next week. the site looks quite different.
We’re racing the weather to get the slab done so we can work through the winter. Since it is slab-on-grade construction, that means a fair amount of underground utility work needs to be completed as well. Cross your fingers for us!
It sounds like the Town will delay their street work until Spring. That shouldn’t affect us as long as they are complete sometime in June. The goal is to be open next summer before the new school year starts. That would meet many of our goals, i.e. increased Town population, increased school enrollment and an expanded labor pool.
