At the Culver BZA meeting on September 18, 2008 there was a variance request for expanding a nonconforming use. The request was to allow an existing two car garage to be expanded to a three car garage. This was an old garage that sat across the setback lines. There was no doubt that the the existing structure should be replaced. The expansion of the nonconforming use in and of itself wasn’t a big deal, but in the overall big picture, it was not only a structure issue, but an impervious surface issue.
Just two days earlier at the Culver Plan Commission meeting, there was discussion regarding the poor condition of the storm sewers in Culver and their inadequacies. That was regarding another section of town that has poor drainage and another project that was adding impervious surface. Even if the solution of adding new and larger storm sewers to correct these issues was economically feasible, it wouldn’t be environmentally appropriate.
Zero Lot Line Homes are one of the things I would like to consider for the Sandhill Farm PUD. There are no provisions for Zero Lot Line Homes in Culver’s current ordinance and it is a missed opportunity on some of the smaller Lots of Record currently platted in town.
Currently there’s not a definition of Zero Lot Line homes on Wikipedia, so I don’t get to cheat and use that reference this time. I did do some searches and found discussions regarding them here, here and for a negative viewpoint, here.
Zero Lot Line Homes are usually placed in zoning districts with higher densities, such as R-2 and R-3 districts, but they are becoming more common as in-fill developments where small undeveloped parcels are subdivided in existing neighborhoods. In a zero lot line development the setbacks are reduced to zero (but not always) on one or two sides of a property allowing the homes to be built side-by-side or back-to-back with a common wall on the property line. Rather than building them in a row, like with multi-family town homes, they will maintain one Side Yard, a Front Yard and often a Back Yard. They can be build in duplex, triplex and quadplex configurations.
Butler Manufacturing Company (BMC) offers sustainable 25-yr color finishes that meet the reflectance and emittance standards established by the energy codes for “cool roofs.” Butler cool roofs help mitigate the Heat Island Effect, which produces high relative temperatures in urban areas that contribute to smog formation. In this way, Butler® building systems help ensure a safer habitat and microclimate. Butler Manufacturing Company is making efforts to make their products as “Green” as possible. Read how BMC products meet various LEED requirements here and here.
_______________________________________________
” Greenwash (a portmanteau of green and whitewash) is a term that is used to describe the act of misleading consumers regarding the environmental practices of a company or the environmental benefits of a product or service.[1] The term Green sheen has similarly been used to describe organizations which attempt to appear that they are adopting practices beneficial to the environment.[2] ” – Definition from Wikipedia
_______________________________________________
There seems to be a lot of Greenwashing going on… Now that the bandwagon is in the parade, everyone wants to pile on! While I think there is merit in a lot of the green movement, I want Easterday Construction Co., Inc. to follow a path that takes the best of the “new” practices and implements the ones that make economic as well as socially conscious sense to our company and our clients. I put “new” in quotes because many of these ideas are not really new. They have been around since the last green movement in the seventies, if not earlier… they were just not economically viable then. Some of them have evolved into forms that are more economical. Some have become economically feasible due to our changing energy costs. Still others sound good, but the return on investment may never make them feasible other than as window dressing. (Ah, that Green Sheen!)
On August 8, 2005, President George Bush signed H.R. 6, the Energy Policy Act of 2005. The legislation contained market incentives in the form of a tax deduction for owner investments in commercial building energy efficiency. The tax deduction is equal to the expenditures made by the taxpayer, subject to a cap… a cap of $1.80 per square foot! That can be $180,000 on a 100,000 square foot building! This applies to interior lighting systems, HVAC systems, hot water systems and the building envelope. To get the entire deduction, the building must be certified to have achieved a minimum of 50% energy savings when compared to the standard requirements. I was just to a seminar on this subject last week and apparently less than 2% of the buildings eligible for this program have taken advantage of it. How can this be? The tax deduction pays for the lion’s share of the project renovation costs and then the energy savings go on forever. Those savings transfer to the bottom line from Day One on. The simplest form of this program is changing light fixtures. The new high efficiency fluorescent fixtures achieve major savings over the metal halide fixtures currently in use in most production plants. The fluorescent fixtures also encourage the user to shut the lights off when not needed because they are instant on, rather than suffering the 10-minute warm up period experienced with metal halide. This makes the use of motion sensors an option to further enhance saving opportunities. The thing about government grant programs is that they are “use it or lose it” carrots. Despite adding an extension to this program, the low participation means this program will expire at the end of 2008 with little chance of further extension. Sounds too good to be true? Apparently that’s part of the problem. We have pitched this to several companies that could benefit, but have been unable to get them to pull the trigger.If you’re interested, more information is available at the American Society of Heating, Refrigerating, and Air Conditioning Engineers’ website at www.ashrae.org, or at NEMA’s Government Relations Energy Policy site at www.nema.org/gov/energy.
Kevin
Update: Another source of information has come to my attention. You can also check out www.lithonia.com/taxdeduction
Update: The program has been extended into 2009.