Whew! There’s a lot going on there! Very little of it good… To orient you, if you’re not local, this is the curve north of Lake Latonka, where S.R. 17 begins to run east towards Plymouth and Sycamore Road continues north towards S.R. 30.
So I don’t bury the lead, the initial reason for writing this was a John Oliver style, “Why is this Still a thing?” rant. I came around this corner from the East the other morning on the way to work, in the dark, to find a school bus stopped to pick up kids from the house on the inside of the curve on the SE corner of this intersection. It wasn’t very visible to me until I was almost on it and it would have been worse for someone coming from the South. The best case for this is this time of year when it’s dark and the bus’s flashing lights are reflecting off of everything. At twilight, the danger doubles down.
This property just recently changed hands. I know things get grandfathered in. I know it’s cold out and kids don’t want to walk far, so the closest point to the house is the preference. But there is a significant piece of property here with an alternate driveway. Barring getting rid of this dangerous driveway, can’t the school bus pick up at the alternate driveway off the curve?
This intersection has always been dangerous. The memorial at the northwest corner of the intersection commemorates the 5 fire fighters that gave their lives at that intersection in 1982. The truck they were in took the corner too quickly and went into the swamp on the west side of the road. This was the worst single-event loss of life for a single fire fighting unit prior to the 9/11 terror attack. The permanent stone memorial included lighted flags and was dedicated in 2014 It replaced 5 wooden crosses on a utility pole near the crash site. It is somewhat fitting that this memorial is quite striking, yet somewhat eerie when lit up at night.
It will be interesting to see how long the West High Corner moniker remains in use since the referenced school is gone. The Northeast corner of the intersection was home to the West High School, named for West Township. Many people were sad to see the school go away this past year. I have to agree that it was frustrating that it couldn’t be repurposed, but location is everything and is often the case with structures like that, its highest and best use was as a school. I could not find documentation, but my recollection is that the school corporation sold it at auction for $1,500 in 2005. From there, the buyer stripped most of the things of value from the building. It became a door and trim shop after that. The Covid pandemic ended that. Most recently it was purchased by Jackson Salvage, which made it go away… except for the slabs and foundations. All that remains is a memorial with a bell and well along Sycamore Road to commemorate the school’s previous glory.
The property on the southeast corner referenced at the beginning of this post was the former location of the original West Township Trustee’s home; a log cabin that was just recently relocated south to Memorial Forest. The picture to the right shows the cabin during reconstruction as new roof framing was placed. The recently formed Marshall County Parks and Recreation Department tried to have it relocated onto the West High site, but there weren’t sufficient funds to make the deal possible.
As attested to by the lost fire brigade, the West High Corner is to be respected. The two exits/entrances onto S.R. 17 from Sycamore Road are also treacherous. From experience, the southernmost connection is the most dangerous and least respected as I often see cars exit or come onto S.R. 17 without stopping. West bound cars cannot see that intersection until they’re into the curve, so if they are taking it quickly, there’s often near misses. In icy winter conditions, this is even worse.
In the mid-1990’s, the Culver Chamber of Commerce petitioned the Marshall County Commissioners to improve Sycamore Road to give Culver more direct access to S.R. 30. For a time, this was a collaborative effort between the Town of Culver, Ancilla College (now Marian College), Culver Academies and Swan Lake Resort. One option for this was to attempt a trade-off with INDOT, changing Sycamore Road into the north end of S.R. 17 and the east/west portion from West High to Plymouth would have become a county road again. This would have had many benefits including an intersection fix at West High, an improved route to S.R. 30 from Culver, fewer driveway accesses, and an easy aerial railroad crossing. At the time, Marshall County had already broached INDOT through MACOG about the Pine Road extension. And also at that time, Plymouth didn’t want to give up the benefits of INDOT maintenance on the main street through the City. (Plymouth is having second thoughts now as their Complete Streets Committee wrestles with the pedestrian issues associated with this.) With the completion of the Pine Road extension to S.R. 17, this initiative is unlikely to be considered. Some of the property that was vacant has been developed, further hindering this right-of-way acquisition.
I don’t see a good solution to this intersection in the near future. At a minimum, I would still like to see something done to eliminate the school bus stop in the middle of a State Highway curve. This intersection doesn’t need another memorial…
One of the things that continually comes up in response to the controversy regarding The Dunes, is the State requirement that municipalities provide utility service to annexed properties within 3 years. The parcels The Dunes is being built on, plus the next parcel south were annexed into Culver around 13 years ago. This was done when Culver Garden Court was being built. The Town is remiss in providing water and sewer to these properties. Granted, they hadn’t asked for services before and as I understand it, the south property doesn’t particularly want services, but it is an obligation the Town accepted in their annexation plan which included a fiscal plan on how to pay for the utility extensions.
The initial impetus for this annexation was to bring Culver Garden Court into Town and provide utility service to support the project. As often happens, politics entered into this. The then Clerk treasurer had just moved to the southernmost property. So the annexation was expanded to include that parcel, else she would have had to resign her position as she would no longer be a resident. Doubling down on this, Culver has annexed the property on the south side of the Masonic Cemetery and that property owner HAS requested utility service. As I understand it, Culver has sufficient utility capacity for this extension, though it will use a significant portion of the capacity reserve.
I have no issue with any of the above. But the conversations regarding the municipal obligations do cause me some concern. If those are truly an issue, there is another ticking timebomb for Culver…
As with most of us, my life is now divided into prepandemic and post-pandemic, so I’m going to forego the research on the timeline beyond that as I talk about the property owned by Culver Investment Corp outlined in cyan and yellow on the adjacent map. (Also known locally as ‘The Beste Property’.) Prepandemic, Culver was presented with a plan for a PUD development at the Northwest corner of Town. This would take in most of the unannexed area within S.R. 17 and S.R. 10. Along with that area (72 acres), the PUD included 14.6 acres of land on the north side of S.R. 10. The majority of this land was to be residential, a continuing Town priority, with the parcel north of S.R. 10 slated to be a gas station/convenience store (area in cyan on the adjacent map). As part of that negotiation with the developer, Culver had sufficient utility capacity, but the developer would be responsible for extending utilities to serve the property. Overall, this was a positive for Culver. I didn’t have any issues with the project, though I did have a few issues with it holding up Sand Hill Farm Apartments and with the treatment of existing business, Good to Go. The property was annexed and a Planned Unit Development (PUD) rezoning was approved.
The project stalled shortly after that. No doubt the pandemic was a factor, but I suspect there were other issues as well. The Plan Commission gave the developer several extensions, but in the end, the PUD was rescinded this year (’23) and the land was rezoned back to S-1, Suburban Residential, as it was prior to the PUD. Shortly after the PUD was rescinded and the rezoning was completed, the property went on the market.
This brings me to my concern: The properties were never combined and are listed for sale individually. Culver Investment Corp is not doing any development of these properties, so the development agreement with that corporation is null and void. If the 6.7 acre parcel at the north east corner of S.R. 17 and S.R. 10 sells and is developed, Culver must run utilities to that parcel per State annexation requirements. (Culver would be unable to deny a permit for a house on that property per current zoning.) It would appear the nearest utilities at 4/10ths of a mile away… as the crow flies… There are no easement provisions to get utilities to this property. Right-of-way access would require INDOT cooperation, which can be tedious at best and require nearly a mile of utility extensions without even considering the need for a water loop.
I have not seen or heard anything about this in public meetings, but this seems to be a potentially large budget item. One potential solution, would be to de-annex the property, but I would suggest that’s not best for Culver either. Having control of that area is important. That was discussed extensively with the Comprehensive Plan Committee. (There was also extensive discussion about increasing our extra territorial boundary.) Getting together a new fiscal plan for the area would seem to be another important step. Culver can’t be completely distracted by the growth on the south side of town and ignore this 86 acre area on the north. That could come back to bite us.
Edit 4-3-24 – This past weekend, I was contacted by a Culver Town Council member regarding this post. The Town Council and their attorney believe my conclusions here are in error. They’re determination is that the development agreement with Culver Investment Corp. is still in force and Culver Investment Corp. is in default. The Council has signed and recorded a resolution affirming their rights of enforcement. I’m pleased that they are looking into this and are pursuing remedies. As attorneys are fond of saying, “Time is of the Essence.” I sincerely hope their interpretation proves to be correct.
Starting with a disclaimer on this. I’m not taking sides on any of the “I’m with Esmie” debacle, because I don’t know the facts of the matter. That said, I work with three other libraries and I’m friends with 4 other librarians. I thought some of their comments were worth sharing:
I’m probably writing this a bit late. I don’t know the current status of the Library Director search, but my impression is it will be a challenge to fill the position. I’m not throwing shade on anyone involved, just noting that the eyes of the library world are on us, and in not the best light.
At the December meeting of the Culver Redevelopment Commission (CRC), Linda Yoder, Executive Director for the Marshall County Community Foundation (MCCF), made a presentation on One Marshall County. One Marshall County is the new umbrella organization that Marshall County Economic Development Corp (MCEDC) has spearheaded. Linda and I serve on the collaborative council discussing this new initiative and Linda had volunteered to make the presentation of the need for One Marshall County before the CRC. This also included a request for funding.
There were a few math errors in the presentation, but one of these jumped out at me was during the discussion of Stellar and the investment that Marshall County Crossroads brought to local communities. The numbers quite clearly did not include the investment from tax credits provided by IHCDA. The Low Income Housing Tax Credits (LIHTC) provided by IHCDA amounted to the biggest single project investment from any of the State agencies involved in Stellar. In all, through the tax credits and loans, Plymouth and LaPaz shared $14 million dollars of investment in their communities with Riverside Commons. That investment didn’t show up in the presentation numbers. This is no shade on Linda! She didn’t prepare the numbers…
This isn’t the first time for this. Culver received approximately $10 million in tax credits and loans for The Paddocks, but that number rarely shows up in their Stellar discussions. These would be huge contributors to the ROI discussion, since local investment in these projects was largely limited to in-kind waivers and some inhouse work. (Culver contributed nothing to The Paddocks project. Plymouth gave waivers on improvements to surrounding alleys. LaPaz waived sewer tap fees and secured matching INDOT funding to improve the street serving the project.)
I think there are a couple of reasons for this lack of acknowledgment: 1) The Stellar Committees don’t really understand the program and 2) Unlike many of the project which were directly municipal projects, i.e. parks, trails, etc., that required more active involvement, the LIHTC portion of Stellar is directly administered by the project developer, so there isn’t a pass-through of dollars. The LIHTC award creates a private project. Where there was some shifting of dollars amongst the other municipal projects within the Stellar awards, that was not an option with LIHTC.
Despite the success of The Paddocks in Culver’s Stellar Community program, Marshall County didn’t even include a LIHTC request in their first application for Stellar Region. I had lobbied for its inclusion and felt that the group slighted IHCDA by not accepting their offer. I lobbied a little harder in their second attempt and Riverside Commons was included in that application, which was successful. This was probably not the only reason, but I firmly believe it contributed to the success of the second application.
There have been some complaints about The Paddocks, but The Paddocks has met or exceeded all of the metrics set forth for it. The same can be said for Sand Hill Farm Apartments, the precursor project that made Culver Stellar and The Paddocks possible. It’s too soon to document that for Riverside Commons, which has different goals, but I have no reason to believe the results will be different. As far as community acknowledgement, the LaPaz and Plymouth councils have done a great job of recognizing Riverside Commons. They each have a Stellar agenda item on their council agendas and request updates for each meeting. Culver did not include The Paddocks in their Stellar reports to the council.
I think it’s a missed opportunity when the LIHTC investment is not celebrated and included in the ROI… But then, I’m obviously biased!
Container Homes
January 15, 2024
Kevin Berger
Commentary, Marshall County, Tips
Community, government, Trends
A lurker asked me about shipping container homes and the PUD Container Home project planned by Voodoo Dream Work LLC at 3919 North Michigan Road between Plymouth and LaPaz. I don’t generally comment on other developer’s projects, but I cannot imagine that this isn’t an improvement on what’s existing. I wish Mr. Landgrebe and Voodoo the best and hope their project is successful.
My lurker asked what I thought of the shipping container home concept. I actually looked into this before and was given some drawings by Brent Martin, SRKM Architecture, to consider. I hadn’t considered container homes for a whole subdivision as Mr. Landgrebe is proposing, but I thought they would be interesting to consider for infill lots. There are many small lots that were platted when standards were looser, that would be difficult to develop now due to setbacks and other restrictions.
There are several lots in Culver that are virtually undevelopable due to their size and setback restrictions. The former Community Garden parcel owned by the Wesley United Methodist Church at the NE corner of Slate Street and Lewis Street comes to mind. Another is the parcel at the SE corner of Clymax Street and Jefferson Street. Not only does the second one have streets on two sides, but it has issues with utility poles and an alley.
An interesting side note: Culver’s current Building Commissioner has a different interpretation of setbacks for corner lots than was enforced in the past. In the past, a lot that fronted two streets was considered to have two front yards and consequently two rear yards. The current interpretation is that the front yard is the side with the street address making the rear yard the opposite from that. This will help some of these difficult small lots.
The biggest positive for shipping container construction is that modular construction can be highly efficient. Parts and pieces that can be manufactured in a controlled, factory setting can speed up construction in the field. Sand Hill Farm Apartments were based on modular construction, with each apartment based on a standardized two bedroom layout. The three bedroom units are the same two bedroom unit layout with stairs to a third bedroom above. The one bedroom units are the same two bedroom unit layout with the second bedroom truncated to allow space for the office in one case and a maintenance room in the other. I spent a lot of time working with Hi Tech Housing, Inc. out of Bristol, hoping to use them and their version of modular construction. In the end, that just didn’t work out.
The main problem I found when I looked into shipping containers was their rigidity; ironically, one of the positives their proponents tout. 1) The module that they create is limiting. To make them into a home, they need to be framed out to allow space for insulation and space for infrastructure like plumbing and electrical to run throughout the space. This reduces the living space. 2) Their steel frames mean that any modifications require a cutting torch. 3) Any attempts to combine them are made difficult by the deep corrugations, which are designed to give them strength, but create additional space issues. 4) Cuts made for doors, windows and larger openings between them take away some of the strength inherent to the modular unit. 5) The Building Inspectors I’ve talked to are uncomfortable inspecting them with the modifications, and would require an Architect or Engineer to sign off on them. This creates a problem in finding an Architect or Engineer comfortable in doing this.
The shipping container home shown in the picture to the right is what I envisioned for some of the above infill sites in Culver, but if would have had Building Inspector issues and would still have required local variances as it would have been below Culver’s required square footage standards. Check out the site for the home to the right here. They have some other interesting pictures, but most of them are single container homes, making the square footage requirement harder to meet. But picture how much floor space stairs between floors would require and how that would subtract from your usable space when you add a second floor.
I don’t feel like shipping containers as homes follow the axiom of “everything to its highest & best use”. The best use for a shipping container is for shipping material. (Much as I said about the best use of West High School would have been its original designed use as a school.) Architect Belinda Carr does a great job of breaking it down in the video below:
I’m not sure I’m ready to say they’re a scam, but they just didn’t make sense to me. To each their own. I just don’t see them as a panacea to the housing crisis.
Modular construction does make a lot of sense. Sand Hill Farm Apartments, The Paddocks and Riverside Commons were all framed using factory produced wall panels. They’re delivered en masse and then carpenters stand them up on site. We did this with most of the Garden Court projects we built as well. It just makes sense when there are repetitive room shapes and sizes. A big difference is that we can work towards other modular sizes when we build this way. Drywall comes in lengths and widths in multiples of 4′. This makes rooms with dimensions based on 2′ increments more efficient. Carpet comes in 12′ widths. We design for that efficiency. Wood studs have easily determined bearing capacities based on 16″ and 24″ centers… which works out with the 4′ drywall increments. Those same 4′ increments work out for OSB and plywood which is used for exterior wall sheathing and roof decking. Studs come in standard length, which can help determine the most efficient ceiling heights. Considerations of these increments helps reduce waste.
I’ll be watching Mr. Landgrebe’s project with interest. It should be interesting visually and his vacation voucher rental model is novel. I wish him the best and who knows; he may cause me to rethink my views on container housing…
0 comments